Lifting & Lashing Points
Grade 80 GT Cobra Eyebolt – G80EB
-
Alloy steel.
Red painted finish.
Sizes based generally on DIN 580 eyebolts.
Minimum breaking load is 4 times the W.L.L.
W.L.L. is based upon in line lifting only.
Marked with CE, W.L.L, material grade, manufacturers ID and size.
Grade 80 GT Cobra Eyenut – G80EN
-
Alloy steel.
Red painted finish.
Sizes based generally on DIN 582 eyenuts.
Minimum breaking load is 4 times the W.L.L.
W.L.L. is based upon in line lifting only.
Marked with CE, W.L.L, material grade, manufacturers ID and size.
Grade 80 GT Cobra Swivel Hoist Ring – G80SHR
-
Alloy steel.
Red painted finish.
Minimum breaking load is 4 times the W.L.L.
Marked with CE, W.L.L, material grade, manufacturers ID and size.
Not suitable for rotation under load.
Grade 80 GT Cobra Swivel Lifting Eyebolt with Ring – G80SL
-
Alloy steel, quenched and tempered.
Red painted finish.
Minimum breaking load is 4 times the W.L.L.
Marked with CE, W.L.L, material grade, manufacturers ID and size.
Not suitable for rotation under load.
Grade 80 GT Cobra Weld on D Ring – G80WDR
-
Base: 16 Mn carbon steel base.
Ring: Grade 80 alloy steel.
Red painted finish.
Welding must be carried out by a qualified welder according to BS EN 287-1.
Minimum breaking load is 4 times the W.L.L.
Marked with CE, W.L.L, material grade, manufacturers ID.
Grade 80 GT Cobra Ring Clutch – G80RC
-
Ring: Casted Alloy.
Base: Forged Alloy Steel.
Red painted finish.
Marked with CE, W.L.L, manufacturers ID and traceability code.
Grade 80 GT Cobra Lifting Clutch – G80LC
-
Ring: Casted Alloy.
Base: Forged Alloy Steel.
Red painted finish.
Marked with CE, W.L.L, material grade, manufacturers ID and traceability code.
Grade 80 GT Cobra Container Lifting Lug – Left & Right Type – CLLL/R12.5
-
High strength alloy steel.
Red painted finish.
Minimum breaking load is 4 times the W.L.L.
Marked with CE, W.L.L, material grade, manufacturers ID, traceability code and L.
Grade 6 Cartec Stainless Steel Rotating Eyebolt C6X807 – G6SSEBR
-
Grade 6, stainless steel, AISI 316L.
Surface blasted, uniform smooth finish.
Can be oriented 360º.
Captive screws.
On the axial pull there can be variation of +/-5º with a 10% decrease in capacity.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
Not suitable for rotation under load.
Grade 10 Cartec Swivel Eyebolt with Ring – 800X – G10SLP
-
Grade 10 alloy steel.
Pink painted finish.
Designed, tested and certified in compliance with the technical directives GS-OA15-04 – BS EN 1677.
Minimum breaking load is 4 times the W.L.L.
Can be oriented at 360° with self aligning tilting ring at 180°.
On the axial pull there can be variation of +/-5° with a 10% decrease in capacity.
Not suitable for continuous rotation under load.
Grade 10 Cartec Rotating Eyebolt with Clamp – 806X – G10SHR
-
Grade 10 Alloy Steel.
Pink painted finish.
Designed, tested & certified in compliance with the technical directives GS-OA15-04 – EN 1677.
Minimum breaking load is 4 times the W.L.L.
Can be oriented at 360°.
The screw is protected with the GEOMET system which guarantees lasting protection in time.
Captive screws.
Eyebolts M36 and above are manufactured to allow use with universal hexagonal keys.
Not suitable for rotation under load
Grade 10 Cartec Heavy Lift Swivel Hoist Ring – 811X – G10HLSHR
-
Grade 10 alloy steel.
Pink painted finish.
Minimum breaking load is 4 times the W.L.L.
Can be oriented at 360°.
Eyebolts M36 and above are manufactured to allow use with universal hexagonal keys.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
Not suitable for rotating under load.
Grade 10 Cartec Heavy Lift Swivel Hoist Ring – 812X – G10HLSHR
-
Grade 10 alloy steel.
Pink painted finish.
Minimum breaking load is 5 times the W.L.L.
Can be oriented at 360°.
Eyebolts screws are manufactured to allow use with universal hexagonal keys.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
Not suitable for rotating under load.
Grade 10 Cartec Swivel Eyebolt – 807X – G10SEBK
-
Grade 10 alloy steel.
Pink painted finish.
Minimum breaking load is 4 times the W.L.L.
Non standard threading and stem length available.
Can be oriented at 360°.
Captive screws.
On the axial pull there can be variation of +/-5º with a 10% decrease in capacity.
Not suitable for rotating under load.
Grade 10 Cartec Swivel Eyebolt – 807XHT – G10SEBHT
-
Grade 10 alloy steel.
Pink painted finish.
Designed, tested and certified in compliance with the technical directives GS-OA15-04 – BS EN 1677.
Minimum breaking load is 4 times the W.L.L.
Can be oriented at 360°
Captive screws.
On the axial pull there can be variation of +/-5º with a 10% decrease in capacity.
Not suitable for rotation under load.
Grade 10 Cartec Single Base Weld-on Lifting Ring – 830X – G10SBLIR
-
Grade 10 high resistant alloy steel.
Black painted finish.
Minimum breaking load is 4 times the W.L.L.
Bracket must be aligned to the pulling direction (tolerance allowed +/- 10º).
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
In particular applications the capacity which has to be used must be determined by the pulling inclination angle following the formula.
Lc = capacity needed per single bracket.
C = load to anchor.
δ = pulling inclination angle.
b = number of sling arms.
Grade 10 Cartec Double Base Weld-on Lifting Ring – 820X – G10DBLIR
-
Grade 10 high resistant alloy steel.
Black painted finish.
Minimum breaking load is 4 times the W.L.L.
The entire perimeter of the base must be welded except for the water discharge area.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
In particular applications the capacity which has to be used must be determined by the pulling inclination angle following the formula.
Lc = capacity needed per single bracket.
C = load to anchor.
δ = pulling inclination angle.
b = number of sling arms.
Grade 10 Cartec Single Base Weld-on Lashing Ring – 831X – G10SBLAR
-
Grade 10 high resistant alloy steel.
Black painted finish.
Minimum breaking load is 2 times the W.L.L.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
In particular applications the capacity which has to be used must be determined by the pulling inclination angle following the formula.
Lc = capacity needed per single bracket.
C = load to anchor.
δ = pulling inclination angle
Grade 10 Cartec Double Base Weld-on Lashing Ring – 821X – G10DBLAR
-
Grade 10 high resistant alloy steel.
Black painted finish.
Minimum breaking load is 2 times the W.L.L.
The entire perimeter of the base must be welded except for the water discharge area.
Marked with CE, W.L.L, material grade, manufacturers ID, product ID mark and traceability code.
In particular applications the capacity which has to be used must be determined by the pulling inclination angle following the formula.
Lc = capacity needed per single bracket.
C = load to anchor.
δ = pulling inclination angle
Rectangular Base Deckplate – DP
-
High tensile steel.
Self colour finish.
Based upon the Admiralty Pattern.
W.L.L. is subject to correct welding procedures being carried out.
Marked with CE, size, traceability code and proof load.
Collared Eyebolt Metric Thread – EBCM
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Meets the W.L.L. performance requirements of BS 4278.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
Dynamo Eyebolt Metric Thread – EBDM
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Meets the W.L.L. performance requirements of BS 4278.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
To be used for vertical lifting only.
Collared Eyebolt UNC/Whitworth Thread – EBCUNC/EBCBSW
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Meets the W.L.L. performance requirements of BS 4278.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
Dynamo Eyebolt Whitworth Thread – EBDBSW
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
To be used for vertical lifting only..
Self Colour Bownut Metric Thread – BNSC
-
Mild C1015 steel.
Self colour and electro galvanised finish.
Sizes generally to BS 3974-1.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
Eyebolt to DIN 580* – EBDIN
-
Mild steel.
Self coloured and electro galvanised finish.
Meets the W.L.L. performance requirements of DIN 580.*
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, material, size and product ID mark
Eyenut to DIN 582* – ENDIN
-
Mild steel.
Self coloured and electro galvanised finish.
Meets the W.L.L. requirements of DIN 582.*
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, material, size and product ID mark.
Long Shank Collared Eyebolt Metric Thread – EBCLSM
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Meets the W.L.L. performance requirements of BS 4278.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
Long Shank Dynamo Eyebolt Metric Thread – EBDLSM
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Meets the W.L.L. performance requirements of BS 4278.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
To be used for vertical lifting only.
Long Shank Collared Eyebolt Whitworth Thread – EBCLSBSW
-
Drop forged, high tensile steel, heat treated.
Self colour and electro galvanised finish.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.
Mild Steel Triangular Link – TL
-
Mild steel.
Self colour finish.
Sizes generally to BS 2837-1.
Minimum breaking load is 5 times the W.L.L.
Marked with CE, W.L.L, size and product ID mark.